Manufacturers & Exporters An ISO 9001:2000 Certified Company

Oil Filtration Plants

Features:

  • Break Down Voltage from 20 KV to more then 50 kV.
  • Filtration level upto < 1 micron.
  • Moisture contents - from 50 -100 PPM to < 5 PPM.
  • Gas contents - upto < 0.05% by volume.
  • Neutralization value- < 0.1 mg of KOH / gm.
  • Plants with minimum and easy maintenance.
  • Low Operating cost due to high vacuum filtration with rotary oil sealed pumps.
  • Available in Portable & Mobile versions.






Application


Oil transfer & circulation system

The plants will have two pumps for oil transfer and circulation. Both pumps will be positivedisplacement gear type, directly coupled with electric motor. The plants will have necessary valves and piping to ensure easy operation and maintenance.

Heating System

The plants will have an insulated heater chamber with indirect type bobbin heater for heating of oil up to 80° C. However the working temperature for filtration will be 55° C. Heater pipes will be finned to have more efficient heat transfer. Temperature will be controlled with thermostat or Digital Temperature indicator cum controller.

Filtration System

The filtration system is suitable for removing suspended particles such as colloidal carbon, oxidation sludge, dirt, rust.

Degassing chamber and vacuum system

The oil dispersed while passing through fine filter will be sprayed on reaching ring tray to have an exposure of oil film to vacuum, because of which moisture removal rate will be increased. Degassing chamber will be evacuated with rotary oil sealed vacuum pump moisture trap, valves, etc.
This plants are suitable for Hydraulic Oil , Thermic Fluid, etc.


Technical Specifications


Flow Rate - LPH. 600 1200 2400 4500 6000
Heater Capacity- K.W. 6 18 45 63 81
Single stage Rotary Oil sealed vacuum Pump. 100 LPM        
Total Power Required. 100 LPM 300 LPM 500 LPM 1000 LPM 2000 LPM
Fine Filter Elements Moulded Cellulose. 7.5 K.W. 20 KW. 50 kW 70 kW 96 kW
Filter Fineness.     3 / 0.5 µ  
Dimensions In Mtrs.
Stationery Unit, W / L / H 0.6/0.9/1.4 0.8/1.2/1.5 1.0/1.8/1.6 1.2/2.0/1.7 1.2/2.4/1.8
Unit on Castors, W / H / L 0.6/0.9/1..6 0.8/1.2/1.7 1.0/1.8/1.9 1.2/2.0/2.0 1.2/2.4/2.1
Unit of Trailers, W / H / L 1.2/1.4/2.1 1.4/1.7/2.2 1.6/2.2/2.4 1.8/2.4/2.6 1.8/2.8/2.6
Max Oil Content in Transformer - Ltrs 1000 2500 7500 20000 35000